Click the labels at the top of the sidebar to find all the mystery clues, all the recipes, or the lotto block.

Wednesday, January 1, 2014

Step 6


I have all my rails done and extra, but need to get some more HSTs finished before I start putting things together. How are you doing?  Somebody is anxious for step 6.
When I got through with my rail strips, I had these leftover bits and pieces which I sliced into as many 1½ inch lengths as I could. These we are going to put together into nine patch units like those shown below.

Depending on your scraps or fabrics, you may have enough to do this without cutting more. If you need more, then cut enough strips to make nine patches in the quantities indicated for your size.

Baby --ten of each combination.
Large table runner--five of each
Small table runner--three of each
Lap--15 of each
bed--21 of each

Step 5--another unit


Step 5
Everyone has a favorite way of making half square triangles.



You can cut squares  x + 7/8 (7/8 inch larger than your finished square size), put them right sides together, draw a line down the diagonal and sew ¼ inch each side  of it and cut down the middle.

You can cut those x + 7/8 squares into triangles and sew them. These tow are illustrated above.

My favorite is using the EZ Angle tool. I will show you how it works.  But first here is the step. You will make as many half square triangle square units as you have rail fence units. Dark/Light. These will be 3½ inches square, so using the methods above, cut your squares 3-7/8 inches.

With the EZ Angle, you cut strips the width of your unfinished blocks--in this case 3½ inches. Put right sides together. Lay the ruler on the  squared off strip and cut the angle. Flip the ruler and cut the square side. Continue to the end of your strip.










The EZ Angle tool (or ruler) eliminates one of the dog-ear triangles that need to be cut off to square
up the units.
Here are all my finished units. I will have to make more, but first a trip to get more white fabric.

Step 4--second cutting step

Are you wondering what this is going to look like in real fabric. I have actually started to sew some so that we have a real example.

Once you have cut your strips and sewn them together you will have something like this.
 Note that because I am using my pink scraps, I have pieces that are not width of fabric. I go ahead and sew them to width of fabric pieces and when one runs out, just start at that point with the next. I don't worry now about measuring.

These strip sets should be measuring 3½ inches wide. If any are way off, check our quarter inch seams. If they are all off but by the same amount, well, adjust. You can make other units the same size.

(Teaching beginning quilters, the rail fence is a good starter block. It is simple, and if they go together the wrong width, we cut them the width that they are into squares. The learners learn the importance of the quarter inch seam allowance, but also the value of adapting along the way instead of giving up.)

Oh, in case you didn't figure it out, these strips are being cut into rail fence units. If your seams are accurate and the strips are 3½ inches wide, then cut them into 3½ inch squares. (Whatever the width, they are cut into squares the same width as the strip sets. If you need to adjust, let me know and I will help with the arithmetic later. I am awake now and can actually count, add, and subtract.)
You see some scrap ends and miss-cuts below. If they are like those on the left, save them for another step later. Those bits on the right I will toss.

We call this "Number Three"

I am going to start numbering these, especially for Facebook where someone commenting can scramble the order of posts. The fabric estimates would be post one. The cutting instructions would be post two.

 So this one is number three.

It's the first sew.

You are going to make strip sets --half of them that are dark/light/dark and half that are light/dark/light. I am going to avoid the math, so instead of counting out the numbers for each size, do this:

Line up a dark strip and a light strips and stitch clear across the length. Set aside a light strip. Press the seam to the dark. Now do the same only set aside a dark strip.

Now add the single dark strips to the light side of the strip sets, and the light ones to the dark sides of other so that you have an equal number of dark/light/dark strips as light/dark/light.

Do you know that when you sew strips together like this you should alternate directions? If you don't you are more likely to end up with a curved strip set.

Press this last seam to the dark, too.
What you will have is a bunch of these"

Tuesday, December 31, 2013

Midnight on the Mystery

Okay, I have been told that the idea of this came up month or so ago. Believe me, a lot has happened in that month or so. I spent most of November in Arizona—two trips—one to help out my daughter whose husband was in the hospital, the other our annual Thanksgiving trip. While I was gone, the girls who were going to organize the Christmas pageant at church got hung up in school and job issues, so when I returned I was privileged to do that. Add in hubby’s doctor appointments, and December is long gone. Well, there is another hour and 25 10 minutes left of it.

So this mystery is not thought out ahead and tested. There may be some burps along the way. I will be testing with you.

So, the first thing we are going to do is cut. If you are using a two color theme, these cuts will be width of fabric and 1½ inches wide—equal numbers of your light and your dark. If you are going scrappy, then you will want the equivalent of that number of strips.

Baby size—12 strips of each value
Wide Table runner—6 of each
Narrow Table Runner—6 of each (I know that is not logical, but bear with me.)
Lap size—18 of each
Bed size—24 of each

If you are cutting at midnight, good luck, be careful, and happy new year. I will wait till morning to cut mine, as being awake might be an advantage.

I will post the sewing for these strips and the additional cuts to make your units first thing in the morning.

First decision dictates fabric requirements.

First decision--how big do you want to make this?

Baby quilt-- 36 by 45 before borders     Fabric estimate: 1½ yards each dark and light.

table runner-- 24 by 51   or 15 by 51 (This includes borders.)  1¼ yards each/ 3/4 yard each

Lap quilt -- 45 by 54 before borders    2+ yards of each

Bed quilt-- 63 by 72 before borders. (Sounds like AHQ size.)  Around three yards each dark and light.

I hesitate to give some yardage estimates because the EQ program way overestimates triangles. When I try to compensate for this I may go too far the other way--or leave you with lots extra. This is a good reason to do scrappy. These figures should give you an idea of how much you may need.

HAPPY NEW YEAR 2014-- Cyber Sew In

Drawings?   √
New Year’s Resewlutions?
A mystery?  √
Recipes?   √
Challenges? √
Prizes?  √
Tips and tricks?  √

On Line Sew In--
I will create a mystery--posting the first clue at midnight. Fabrics? Darks and lights. Don't have it designed yet but it will be either a two color quilt or scappy dark and light. Multiple sizes available.
Points  and chances for drawing--we have one prize offered already--Robin in Leavenworth already gets a point/chance:
1. Share a recipe--either a NY snack or a better for you recipe for something we love.
2. Share a tip or trick for quilting, sewing, knitting, crocheting  or just housewifery.
3. Post pictures of what you are working on.
4. Create your own challenge for the day/year--your New Year's Re-sew-lution. Share it. Share your progress on the day part.
5. Review your favorite quilting tool and tell us why you thing everyone should have one.

Share in comments on the List, in the Facebook group, or comments here.
I will post this on the list, on the Facebook group, and on our mystery blog (which hasn't had much attention.) I will post the mystery steps the same way.